|
Description |
| The S3 is the
choice for demanding recording engineers who need to monitor
deep bass in mid sized control rooms. One woofer acts as a full-range
driver with the second woofer joi-ning it only below 150Hz.
This unusual approach effectively doubles the area and power
of the woofer when it needs to respond to deeper frequencies,
resulting in an excep-tionally tight and punchy low end without
com-promising midrange performance. The active version has three
150W amplifiers that deliver outstanding dynamic performance.
It can be used either horizontally or vertically, so that very
flexible positioning within the studio is possible. No compromise
5.1 set up can be built with the Sub1 Subwoofer. |
|
|
Technical Data S3A |
|
3-way active bass reflex speaker |
| Woofer |
186mm, HexaCone® |
| A.R.T. tweeter |
see A.R.T. Technology |
Freq.response
(± 3dB) | 32Hz - 35kHz |
| Front panel |
Input/HF gain, Hi/Lo EQ
adjustment, standby
|
| Power |
240W (sin), 360W (RMS) |
| Inputs |
Balanced XLR |
| W x H x D |
500mm x 240mm x 320mm
(20” x 9.5” x 13”) |
| Weight |
16 kg (35 lbs) |
| Warranty |
2 years |
|
|
